PE-WD-01/GS120 用于倾斜传感器摆锤编码器

产品标题：PE-WD-01/GS120 用于倾斜传感器摆锤编码器 Pendelgeber

型号：PE-WD-01/GS120 用于倾斜传感器摆锤编码器 

品牌：  Pendelgeber

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品图片展示

产品详情资料

 准进行测试时为psi（1.2 MPa）。启动前密封地漏
涂底漆以防止堵塞。
受污染的混凝土基底出现浮浆迹象（表面上有一层软弱材料
混凝土表面可见或不可见）、结垢、剥落、碎裂、碳化或
分层必须通过机械方式去除，以获得坚固、清洁的基材。使用
机械清除方法，如喷丸清理、翻松或金刚石研磨，以清洁和
准备混凝土基底。如果表面为金刚石研磨，则使用12-16粒金刚石和
用HEPA过滤工业真空吸尘器吸尘底层地板，以清除灰尘和碎屑。
必须检查现有混凝土底层地板上的裂缝，以确定裂缝是否是由于
典型的混凝土“收缩”，或者是结构运动的结果。对于后者，
必须解决裂缝修复问题，否则裂缝终将通过美国政府电报
杜洛克™ EW2底漆。就项目咨询工程师或请求
所有可疑结构裂缝的专业结构工程师。
修复旧混凝土和新混凝土中的所有非结构性裂缝，以尽量减少和控制其
通过USG Durock层发送电报™ EW2底漆。首先沿
通过凿或其他合适的方法确定裂缝的长度。接下来，清除积聚的灰尘
以及使用HEPA过滤工业真空或其他合适设备从裂纹腔中取出的碎屑
方法必须填充混凝土底层地板中存在的各种裂缝，包括收缩裂缝
使用适用于混凝土地板的市售裂缝填充环氧粘合剂
应用。为确保优异的抗裂性，使用环氧树脂注入修补裂缝
根据行业指南修复活跃或深层裂缝的技术。请注意
混凝土底层楼板中现有的裂缝只会减弱，但不会完全阻止它们的能力
通过美国杜洛克电报™ EW2底漆。现有的增长
混凝土底层地板罐出现裂缝或形成新裂缝
导致USG Durock电 Durock™ EW2 Primer is being applied must be a minimum of 175
psi (1.2 MPa) when tested per the ASTM C1583 standard. Seal off floor drains before starting the
application of the primer to prevent clogging.
Contaminated concrete substrates exhibiting signs of laitance (a layer of weak material on
the concrete surface either visible or invisible), scaling, spalling, crumbling, carbonation or
delamination must be mechanically removed to achieve a solid and clean substrate. Use
mechanical removal methods such as shot blasting, scarifying or diamond grinding to clean and
prepare the concrete substrate. If the surface is diamond ground, use 12-16 grit diamonds and
vacuum the subfloor with a HEPA filtration industrial vacuum to remove dust and debris.
Cracks in the existing concrete subfloor must be inspected to determine if the crack is due to
typical concrete “shrink” or if it is a result of a structural movement. In the case of the latter,
remediation of the crack must be addressed or eventually the crack will telegraph through USG
Durock™ EW2 Primer. Consult with the engineer on the project or request the services of a
professional structural engineer for all suspected structural cracks.
Repair all non-structural cracks in old and new concrete to minimize and control their ability to
telegraph through the layer of USG Durock™ EW2 Primer. First remove the weak concrete along
the length of the cracks by chiseling or other suitable means. Next, remove accumulated dust
and debris from the crack cavities using a HEPA filtration industrial vacuum or other suitable
means. Various cracks present in the concrete subfloor including shrinkage cracks must be filled
with a suitable commercially available crack-fill epoxy adhesive designed for concrete flooring
applications. To ensure superior resistance to crack growth, use injection epoxy crack-repair
techniques per industry guidelines to repair cracks that are active or deep. Note that repair of
existing cracks in the concrete subfloor only subdues, but does not completely prevent their ability
to telegraph through USG Durock™ EW2 Primer. Growth of existing
cracks or  
 
 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌