欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

XTCE750N22A DIL M750 用于伊顿塑壳断路开关接触器

型号: XTCE750N22A  分类: foxboro
  • XTCE750N22A
  • XTCE750N22A
  • XTCE750N22A
  • XTCE750N22A
  • XTCE750N22A


产品标题:XTCE750N22A DIL M750 用于伊顿塑壳断路开关接触器 EATON

型号: XTCE750N22A DIL M750 用于伊顿塑壳断路开关接触器 

品牌: EATON

质保:七天验收期,质保期一年
发货期:1-3个工作日

 

 

产品图片展示
XTCE750N22A DIL M750 用于伊顿塑壳断路开关接触器

产品详情资料

 矿物酸苯甲醇
浓碱液二氯甲烷
溶剂时间
丙酮10分钟
异丙醇10分钟
甲苯5小时
Autoflex EB第5节耐化学性
34 3BSE043449R501号
耐溶剂性
Autoflex EB能够承受与Autotex F157或F207相同的化学物质
根据Autotex F157/F207章节。
室外使用
与所有聚酯薄膜一样,Autoflex EB不适用于
条件1.操作面板的安装夹不能提供安全接地
面板和设备机柜之间的连接。
2.在操作面板的快速连接底座和
面板机箱。
3.在面板底盘和
门上近的接地点。
4.在门和设备之间连接一条结实但短的接地编织线
内阁
5.将电缆缠绕在24 V DC馈线上。
操作员面板
铁氧体磁芯
机柜内安装板
电源
24伏直流电
第7节其他安装提示面板中的以太网连接
3BSE043449R501第45页
6.铁氧体磁芯抑制对24 V馈线的干扰。
围绕铁氧体磁芯旋转2圈可提供4倍于1圈的抑制。
围绕铁氧体磁芯旋转3圈可提供9倍于1圈的抑制。
面板中的以太网连接
1.在一些以太网工业装置中,RJ45触点的屏蔽连接到
底盘通过电容器。
接地线应短,导线应具有大面积。
 ol 10 minutes
Toluene 5 hours
Autoflex EB Section 5 Chemical Resistance
34 3BSE043449R501
Solvent Resistance
Autoflex EB withstands exposure to the same chemicals as Autotex F157 or F207
according to section Autotex F157/F207.
Outdoor Use
In common with all polyester based films Autoflex EB is not suitable for use in
condit1. The operator panel’s mounting clamps do not provide a secure grounding
connection between the panel and the device cabinet.
2. Connect a 2.5 mm2 wire between the operator panel’s quick-connect plinth and
the panel chassis.
3. Connect a 6 or 4 mm2 wire or grounding braid between the panel’s chassis and
the closest grounding point on the door.
4. Connect a strong but short grounding braid between the door and the device
cabinet.
5. Twist the cables onto the 24 V DC feed.
Operator panel
Ferrite core
Mounting plate in the cabinet
Power supply
24 V DC
Section 7 Additional Installation Tips Ethernet Connection in the Panel
3BSE043449R501 45
6. A ferrite core suppresses disturbances to the 24 V feed.
2 turns around the ferrite core provide 4 times the suppression of 1 turn.
3 turns around the ferrite core provide 9 times the suppression of 1 turn.
Ethernet Connection in the Panel
1. In some industrial units for Ethernet, the RJ45 contact’s shield is connected to
the chassis via a capacitor.
The grounding wires should be short and the conductor should have a large area.
A long, thin grounding wire has a very high impedance (resistance) at high
frequencies and will not guide disturbances to the ground.
Multi-wire conductors are better than single wire conductors with the same area.
A braided conductor wire with the same area is even better.
The best is a short, thick grounding braid.

主营产品简介

专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

 

 



更多
查看更多 >>

推荐产品