ABB SPFEC12 销售贝利卡件电源板模块备件

产品标题：ABB SPFEC12 销售
产品型号：ABB SPFEC12 销售
品牌：ABB 
发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

产品图片展示

产品详情资料

 
至115伏交流电。下图显示了交流输入电压的选择说明
以及编码器电源电压的选择。
如果SDCS-CON-1带有SDCS-IOB-1板，或
SDCS-CON-2（无I/O板IOB-3）一起
使用脉冲编码器进行速度测量时，增量编码器电源电压必须
由跳线X5、X4和X3选择。电源接口板用于转换器
模块型号C1。有两种不同的版本
正在使用中。所用类型为：-SDCS-PIN-11，用于500V下的25 A、50 A和75 A转换器-SDCS PIN-12，用于600 V下的50 A转换器SDCS-PIN-1x板包括：
-点火脉冲电路和脉冲变压器-通过电流互感器测量电枢电流-晶闸管保护缓冲电路电源接口板用于DCS 500 C1和C2型转换器模块。使用的版本不同。使用的类型有：
-SDCS-PIN-21，用于500 V时的100 A…350 A转换器
-SDCS-PIN-22，用于500 V时的450 A…520 A转换器➀
-SDCS-PIN-23，用于600 V 110 A…270 A转换器
-SDCS-PIN-24，用于600 V下的450 A转换器➀
-SDCS-PIN-25，用于500 V下的700 A转换器
➀ 在这些板上使用SDCS-PIR-21。电阻器R112、R114和R116装有MOV
SDCS-PIN-23/24上的元件，以及所有其他带有0电阻的PIN板上的元件。SDCS-PIN-2x板包括：-带脉冲变压器的点火脉冲电路-电枢电流测量-晶闸管保护缓冲电路（由RC电路和MOV元件组成）-交流和直流高欧姆电压测量-额定电流标度、零电流检测和HW电压类型编码-散热器温度测量接口
图5.2/1 SDCS-PIN-2x板的布局。
带PTC传感器-用于过电压保护和电压测量的保险丝-如果SDCS-PIN-21/22连接板安装在DCF50x-0100…0520/DCF60x0100…0.520中，则元件R112、R114和R116不是内置的注意：如果此PCB用作DCF的备件，
然后是电阻器R112/R114/R116（值=0）
必须删除。备件通过使用RC电路和MOV元件来保护电源部件。缓冲电路与每个晶闸管直接并联，中间没有保险丝。除了MOV
元件连接在相位和
由保险丝F101至F 103保护。交流电压测量从保险丝后面进行。保险丝数据：Bussmann KTK-R-6A（600V）
（由RC电路和MOV元件组成）The power interface board is used for converter
modules model C1. There are 2 different versions
in use. The used types are:- SDCS-PIN-11 for 25 A, 50 A and 75 A convertersat 500V- SDCS PIN-12 for 50 A converters at 600 VThe SDCS-PIN-1x boards consists of:
- firing pulse circuits and pulse transformers- measurement of the armature current via currenttransformers- snubber circuit for thyristors protectionThe power interface board is used for DCS 500converter modules models C1 and C2. There aredifferent versions in use. The used types are:
- SDCS-PIN-21 for 100 A...350 A Converters at 500 V
- SDCS-PIN-22 for 450 A...520 A Converters at 500 V ➀
- SDCS-PIN-23 for 110 A...270 A Converters at 600 V
- SDCS-PIN-24 for 450 A Converters at 600 V ➀
- SDCS-PIN-25 for 700 A Converters at 500 V
➀ at these boards the SDCS-PIR-21 is usedResistors R112, R114 and R116 are fitted with MOV
elements on the SDCS-PIN-23/24, and on all otherPIN-boards with 0-
resistors.The SDCS-PIN-2x board consists of:- firing pulse circuits with pulse transformers- measurement of the armature current- snubber circuit for thyristors protection(consists of RC circuits and MOV elements)- AC and DC high ohmic voltage measurement- scaling for rated current, zero current detectionand HW voltage type coding- interface for heat sink temperature measurement
Fig. 5.2/1 Layout of the SDCS-PIN-2x board.
with a PTC sensor- fuses for overvoltage protection and voltagemeasuring- If the SDCS-PIN-21/22 connection board is installed in a DCF50x-0100...0520 / DCF60x0100...0520, then the components R112, R114and R116 are not build-inNote:If this PCB is used as a spare part for a DCF.... ,
then the resistors R112/R114/R116 (value = 0
)
must be removed.Spare partThe protection of the power part is done by usingRC circuits and MOV elements. Snubber circuitsare wired up in parallel to each thyristor directlywithout fuses in between. In addition to that MOV
elements are wired up in between the phases and
protected by the fuses F101 to F 103. The AC voltage measurement is taken from behind the fuse.Fuse data: Bussmann KTK-R-6A (600V)
(consists of RC circuits and MOV elements)The SDCS-POW-1 board is designed for DCS 500
converter modules and is mounted on the electronic support. This board is used for all types of
modules independant from current or voltage
range.
The SDCS-POW-1 works on a switched mode basis in fly back configuration. It generates all necessary DC voltages for the SDCS-CON-1 and all

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,