




产品标题:3BHB006338R0001
产品型号:3BHB006338R0001
品牌:ABB
发货期:1-3个工作日,具体可联系客服
质保:质保期一年!
产品图片展示

产品详情资料
-风扇可能未打开或
数据
交流输入/输出电压:单相;230伏
交流输入/输出电流:5 A
交流峰值电流:根据风机启动电流;需要外部开关设备
交流隔离电压:690 V(通过自耦变压器供电)
负载:带起动电容器的单相交流电动机
频率:50 Hz/60 Hz
输出数据:无源器件;仅与DCS电子设备一起使用
端子横截面积:X92:电源;大2.5 mm2
X11:至X31:电机连接;6.3毫米faston
电流标度:负载电阻R100/R101;R100/R101=120个
互连:见DCP转换器功率部分冷却
5.9.1 PW 1002型
本设备专门设计和使用于
DCP变频器直接默认800 A以上
条件它由230 V单相供电
电源并将监控两个单相
并联安装在变频器顶部的风扇
配置传输特性相同
PW 1003中描述的零件。零件
本手册中的功率段冷却显示
电源之间的互连此设备设计用于与
任何类型的重建应用程序的DCR工具包。它可以
监测单相或三相风扇的电流
它可以级联,这意味着多个设备可以连接到一个PTC输入,以监测多个风扇电流。传输特性
如图5.9/3所示,需要根据
通过改变负载电阻来改变风扇电流
或通过软件参数,具体取决于类型
现有电源部分已使用的风扇数量。This device is designed to be used together with
the DCR kit at any type of rebuild application. It can
monitor the current of single or three phase fans
and it can be cascaded, which means multiple devices can be connected to one PTC input to monitor several fan current. The transfer characteristic
shown at figure 5.9/3 needs to be adapted to the
fan current either by changing the burden resistors
or by a software parameter, depending on the type
of fan already used for the existing power part.The heatsink temperature of the power part of
some DCS converters is monitored via a PTC element. Other DCS converters check the cooling air
temperature and the airflow. The third option is this
one, which measures the fan current being within
limits. In case the fan current is too low or there is
no fan current at all or it is too high, the drive needs
to be switched off. The fan current may be too low
because
- the fan may not be switched on or
Data
AC input / output voltage: single phase; 230 V
AC input / output current: 5 A
AC peak current: according to fan starting current; external switching device needed
AC isolation voltage: 690 V (supply via autotransformer)
Load: single phase AC motors with starting capacitor
Frequency: 50 Hz / 60 Hz
Output data: passive device; to be used together with DCS electronics only
Terminal cross sectional area: X92: power supply; max. 2.5 mm2
X11: to X31: motor connection; 6.3 mm faston
Current scaling: burden resistor R100 / R101; R100/R101 = 120 each
Interconnection: See part power section cooling of DCP converters
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。
主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
优势:供应进口原装正品,专业停产配件,
发货快,货期精准,
主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。
只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!
●使用前:
在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。
Read and strictly follow safety-related information before operatingmaintainingand installing equipment.
●使用者要求:
必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。
Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:
应用于品牌本系列工业以及生产生活自动化设备产品。
Used in the brand of this series of industriaand production automation eauipment products
适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。
Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.
●操作人员:
应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:
熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。
Equipment should be installed,operated and maintained by trained operators from the brand
●危险情况
警告
.请注意使用人员的人身安全。
●除了产品特性以及功能,还需了解产品的使用寿命环境。
●充分学习产品使用手册,否则非专业人员可能会造成人身危险。
Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.
●服务行业
适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业
Applicable to cementwood,stone,rubber,petroleumchemical, power generation,
Copyright ©2019-2022 瑞昌明盛自动化设备有限公司 版权所有 赣ICP备2021006016号