APPLIED 0090-00223 欢迎咨询价优 机器人备件DCS卡件

产品标题：APPLIED 0090-00223 
产品型号：APPLIED 0090-00223
品牌： APPLIED  
发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

产品图片展示

产品详情资料

 
 
每个光通道的Mb）：-通道0用于将来自覆盖控制（APC2或通过来自其他控制器的适配器模块）的数据通信到DCS600驱动器。-通道2（主从动件）用于操作
两个或更多驱动器相互依赖。此应用程序所需的命令和值在此板上生成通道3准备连接PC工具
调试和维护。NDBU-95型以及吨之间DDCS分支单元（DBU）用于实现DDCS链路的星型拓扑结构（仅适用于DCS600/DCF 600）。这允许从设备发生故障或变为
无电源而不禁用通信。这个
NDBU接收来自主机（PC）的消息，并同时将其发送到所有从属单元。每个从机单元都有一个单独的地址，只有有地址的从机单元才会向主机发送回复消息。也可以使用NDBU，从而实现点对点通信。7.4 DDCS分支单元NDBU-95NDBU-95 DDCS分支装置有九个输出通道，用于发送来自主机的消息。一个从设备发送的回复消息被传送给主设备，如果需要，也可以传送给其他从设备。可以使用多个NDBU-95
并行、串联或任何组合。
主机和之间的大距离DCS 500系统有不同的选项
现场供应。有单相和三相磁场
励磁机可用，可以集成
（二极管励磁机SDCS-FEX-1和半控
励磁机SDCS-FEX-2）或外部安装
（带SDCS-FEX32板的半控DCF503-0050和带
SDCS-FEX-31板）。
三相励磁机是转换器模块
其输出电流范围类似于
DCS 501/601或DCS 502/602。这种可能性
由单独的文档描述。二极管励磁机板SDCS-FEX-1是一个单相二极管整流器，用于交流输入电压高达500 V，直流输出电流为6 a。该板必须安装在电枢转换器模块内。励磁电流由直流输出电压（线电压乘以0.9）和励磁绕组电阻定义。通过使用与励磁绕组串联的外部电阻器，励磁电流可以稍微适应。如果尚未安装SDCS-FEX-1板，则必须将其机械固定在电子电源部件SDCS-POW-1旁边，并使用端子X14通过扁平电缆连接至SDCS-CON-x。The Diode Field Exciter board SDCS-FEX-1 is asingle phase diode rectifier for an AC input voltageup to 500 V and a DC output current of 6 A. Theboard has to be mounted inside the armature converter module. The excitation current is defined bythe DC output voltage (line voltage multiplied by0.9) and the resistance of the field winding. By using an external resistor in series with the field winding the field current can be adapted slightly.If the SDCS-FEX-1 board isn't already installed itmust be mechanically fixed beside the electronicpower part SDCS-POW-1 and connected via a flatable to the SDCS-CON-x by using terminal X14.aThe DCS 500 system has different options for the
field supply. There are one and three phase field
exciters available, which can be either integrated
(diode field exciter SDCS-FEX-1 and half controlled
field exciter SDCS-FEX-2) or externally mounted
(half controlled DCF503-0050 with the SDCS-FEX32 board and fully controlled DCF504-0050 with the
SDCS-FEX-31 board).
Three phase field exciters are converter modules
themselves with the output current range similar to
the DCS 501/601 or DCS 502/602. This possibility
is described by a seperate documentation.
NDBU-95以及
NDBU-95以及t之间DDCS Branching Unit (DBU) is used (only for DCS600/DCF 600) to implement the star topology ofDDCS link. This allows a slave unit to fail or become
unpowered without disabling the communication. The
NDBU receives messages from the master (PC) andsends them to all the slave units simultaneously. Eachslave unit has an individual address and only theaddressed slave unit sends a reply message to themaster. It is also possible to use NDBU thus enablingpeer-to-peer communication.7.4 DDCS Branching unit NDBU-95NDBU-95 DDCS Branching Unit has nine outputchannels where messages from the master are sent.The reply message sent by one slave unit is deliveredto the master and it can be delivered also to otherslaves if necessary. Several NDBU-95s can be used
in parallel, in series or in any combination of these.
The maximum distance between the master and
NDBU-95 as well as between This board must be used together with a DCS 600
module equipped with a SDCS-CON-2 board including software S15.xxx.The board is equipped with an own controller withthe following main functionalities:• The software structure implemented in this board
is divided in two sections. The first section is built
from the speed regulator and its additional
functions which is producing the torque reference.• The second section is prepared to be programmed with its own characteristics for control andregulation.• Evaluation of the received data to produce a torque reference to be transmitted to the controller7.3 Control and communication board SDCS-AMC-DCboard CON-2. Actual values from the CON-2 areread, evaluated and retransmitted to the overriding control.Furthermore the board is equipped with three optical channels (max. data transmission speed is 4
Mb for each optical channel):- Channel 0 is used to communicate data from theoverriding control (APC2 or via adapter modulesfrom other controllers) to the DCS600-drive. 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,