




产品标题:21504-000-012-05-02
产品型号:21504-000-012-05-02
品牌:BENTLY
发货期:1-3个工作日,具体可联系客服
质保:质保期一年!
产品图片展示

产品详情资料
RS485接口使用屏蔽双线电缆。允许长度为5米。电线
必须连接到端子X2:1和
X2:2,屏幕显示为X2:3。
这种类型的典型应用是两个直流电机
连接到一个转换器。负载共享可以
通过调整二台直流电机的励磁电流来完成。
两个节点有两种可能的配置
励磁机数量:
-一个SDCS-FEX-2和一个外部励磁机
(DCF503A-0050、DCF504A-0050或三相
励磁机)或
-两个外部励磁机单元(DCF503A-0050,
DCF504A-0050或三相励磁机)x三相磁场电源转换器DCF 501/502
和DCF 601/602需要一个单独的主动过电压保护装置DCF 505和DCF 506,以保护电源部件免受不允许的高压。
如果出现以下情况,则保护装置通过打开F+和F-连接器之间的飞轮电路进行操作
发生过电压。DCF 505/506包括
8.5 DCF505/DCF506过压保护
触发单元和自由轮晶闸管(两个在DCF 506处反并联)。晶闸管点火是由
1400伏(FEP1-500伏)和1800伏(FEP2-690伏)
触发二极管。
DCF 506由一个继电器输出组成,用于发送信号
过电压保护激活的励磁电源转换器。输出在自由轮中激活
直到电流小于约。0.5安X Three phase magnetic field power converter DCF 501/502
And DCF 601/602 require a separate active over-voltage protection device DCF 505 and DCF 506 to protect the power supply components from impermissible high voltages.
The protective device operates by opening the flywheel circuit between the F+and F-connectors if
Overvoltage occurs. DCF 505/506 includes
8.5 DCF505/DCF506 overvoltage protection
Trigger unit and free wheel thyristor (two in reverse parallel at DCF 506). Thyristor ignition is controlled by
1400 V (FEP1-500 V) and 1800 V (FEP2-690 V)
Trigger diode.
DCF 506 consists of a relay output for sending signals
Excitation power converter activated by overvoltage protection. Output activated in freewheel
Until the current is less than approximately. 0.5A8.4.7 Field exciter configurations
The data exchange between the SDCS-CON-x and
the field exciter SDCS-FEX-2 or the DCF503A/
504A-0050 is done via a RS485 serial link, which
can be configured as a bus structure. This link is
used to transfer references, actual values and settings for up to two field exciter units.
The drive software located on the SDCS-CON-x
主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。
主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
优势:供应进口原装正品,专业停产配件,
发货快,货期精准,
主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。
只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!
●使用前:
在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。
Read and strictly follow safety-related information before operatingmaintainingand installing equipment.
●使用者要求:
必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。
Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:
应用于品牌本系列工业以及生产生活自动化设备产品。
Used in the brand of this series of industriaand production automation eauipment products
适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。
Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.
●操作人员:
应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:
熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。
Equipment should be installed,operated and maintained by trained operators from the brand
●危险情况
警告
.请注意使用人员的人身安全。
●除了产品特性以及功能,还需了解产品的使用寿命环境。
●充分学习产品使用手册,否则非专业人员可能会造成人身危险。
Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.
●服务行业
适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业
Applicable to cementwood,stone,rubber,petroleumchemical, power generation,
Copyright ©2019-2022 瑞昌明盛自动化设备有限公司 版权所有 赣ICP备2021006016号