EPRO PR6424/010-030 振动传感器涡轮传感器电源板

产品标题：EPRO PR6424/010-030 振动传感器
产品型号：EPRO PR6424/010-030 振动传感器
品牌：EPRO  
发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

产品图片展示

产品详情资料

 
 工作范围内单独工作
当系统处于运行模式时。一个人应该
保持在信封外，全权负责
在发生以下情况时激活紧急停止按钮
危险的情况应该出现。确保已为整个工作单元做好准备
运行机器人系统前的安全操作。全部更正
机器人系统和外围设备的异常情况
设备启动前。通知您的主管或培训人员
维护人员发现任何异常情况
无法纠正自己。
确保机器人系统处于电机关闭状态
模式尽可能长。电机关闭模式是指
机器人电机的驱动电源被切断
踩下制动器。将程序执行降至低，
并尽快返回“电机关闭”。
使用操作模式选择手动减速
机器人控制柜前面的选择开关。
从储物箱中拆下编程单元
在控制柜中，并携带它（带有启用设备
释放）到机器人的工作范围内。这确保了
机器人电机的操作电源断开
机器人处于电机关闭模式。
始终穿戴规定的防护服和设备
根据安全规定。一般来说，宽松的衣服
因为领带、围巾、臂章等不应佩戴在附近
机器人系统。在对机器人系统进行维护时，所有先前的安全措施
指导方针应生效，并应符合以下要求：
确保工作范围内的所有人员都非常熟悉
结合机器人的性能特点及其潜在危险。
在机器人控制器上工作或机器人在生产时
模式下，确保工作信封上没有人员。
之前，务必断开主电源并“锁定”开关盒
视察
执行维护后，更换所有设备维修盖
程序
始终规划逃生路线。
切勿用任何身体部位或临时设备减速或停止机器人。
气压的消除或损失可能导致机构移动。
必须采取适当的预防措施，防止设备损坏或
此类情况下的人身伤害。hen performing maintenance on the robot system, all of the previous safety
guidelines should be in effect as well as the following:
Make sure that all persons within the work envelope are thoroughly familiar
with the performance characteristics of the robot and its potential hazards.
When working on the robot controller or while the robot is in the production
mode, make sure that the work envelope is clear of personnel.
Always disconnect main power and 'Lock-Out' the switch box before
inspection.
Replace all equipment-service covers after performing a maintenance
procedure.
Always have an escape path planned.
Never slow or stop the robot with any body part or makeshift device.
Removal or loss of air pressure may result in moving mechanisms.
Appropriate precautions must be taken to prevent equipment damage or
personal injury in such cases.
Make sure that the entire work cell has been prepared for
safe operation before running the robot system. Correct all
abnormal conditions of the robot system and peripheral
equipment before start up. Notify your supervisor or trained
maintenance personnel of any abnormal condition that you
cannot rectify yourself.
Make sure that the robot system is in the MOTORS OFF
mode for as long as possible. MOTORS OFF mode means
that drive power is removed from the robot’s motors and the
brakes are applied. Keep program execution to a minimum,
and return to MOTORS OFF as soon as possible.
Select Manual Reduced Speed with the operation mode
selector switch on the front of the robot control cabinet.
Remove the programming unit from its storage compartment
in the control cabinet and carry it (with the Enable Device
released) into the work envelope of the robot. This ensures
that operating power to the robot motors is disconnected
and the robot is in the MOTORS OFF mode.
Always wear protective clothing and equipment specified
by safety regulations. In general, loose-fitting clothes such
as ties, scarves, arm bands, etc., should not be worn near
the robot system.
When working with any robot system, observe the following
safety guidelines:
Keep the operator work area clean at all times.
Know the location of all EMERGENCY STOP buttons and
POWER ON/OFF switches that may have to be used
quickly.
Make sure that each person directly responsible for the
operation 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,