MITSUBISHI A1S68DAV控制系统DCS模块

产品标题：MITSUBISHI A1S68DAV
产品型号：MITSUBISHI A1S68DAV
品牌：MITSUBISHI  
发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

产品图片展示

产品详情资料

  编号12）将功能代码为9的料端传感器输入设置到输入端口。标签CD CD 2）标签连接是通过使用CP-160（方法）的自动单针缝合来执行的。选择CP-160上的标记，然后打开自动单针缝纫的标记。（说明）CD部分的针数多可设置为500针。如果针迹长度为2 mm，则可以缝大约1000 mm（1 m）。此功能可以在不使用料端传感器（ED：可选）的情况下执行自动单次缝合。因此，踩下踏板一次，即使标签不在材料末端，缝纫机也会根据缝纫图案进行后的缝纫。–6–（4）IP-100E操作面板有关更多信息，请参阅IP-100E/SC-510的说明手册。重新缝制开关未使用的针上/下这是执行针上/向下补偿缝制的开关。补偿开关（上/下补偿针和一针补偿针可以通过22号功能设置进行切换。）屏幕切换这是切换屏幕的开关。开关有/无倒缝这是在缝纫开始时打开/关闭自动倒缝的开关。缝纫时的送料针迹*此开关不能用于没有配备自动反向送料缝纫装置的启动开关的缝纫机。有/无倒缝这是在缝纫结束时打开/关闭自动倒缝的开关。缝纫时的送料针迹*此开关不能用于缝纫机，该缝纫机非配有自动反向送料缝纫装置的末端开关。复位开关这是使底线计数器或缝纫计数器的值成为设定值的开关。重新缝制开关信息开关电源显示灯针上升/下降补偿开关材料边缘传感器开关智能媒体盖屏幕切换开关单针缝制开关智能媒体槽有/无倒缝有/无自动线迹在缝制开始开关微调开关智能媒体有/无反缝迹剪线禁止开关可选：缝纫结束开关计数器值设置开关零件号HX00575000复位开关大速度限制可变电阻示教开关–7–示教开关未使用信息开关这是执行各种功能设置的开关。材料边缘传感器在机器上安装材料边缘传感器时生效。开关用于选择缝制过程中是否使用材料边缘传感器。单针缝纫当此开关设置为有效时，缝纫机自动将开关操作到指定的针数。有/无自动当此开关设置为有效时，缝纫机在完成指定针数时自动执行剪线器开关剪线。剪线此开关禁止所有剪线。禁止开关*此开关不能用于未配备自动剪线装置的缝纫机。计数器值设置这是设置数量计数器底线计数器值的开关(3) Example of application 1) When the CP-160 is used together with the material end sensor (ED : optional), it can be used as a small edge-controller. (Method) Adjust the position to mark of the CP-160, turn ON material end sensor ON/OFF switch of the CP-160, and turn ON mark of the automatic one-shot stitching. (Caution) 1. Number of rotations of the automatic one-shot stitching can be changed by the function setting (No. 38). 2. It is necessary to set the material end sensor input of the function code : 9 to the input port by using the function of the optional input/output function selection (Function setting No. 12). Label CD CD 2) Label attaching is performed by the automatic one-shot stitching with the CP-160 (Method) Select mark on the CP-160, and turn ON mark of the automatic one-shot stitching. (Explanation) Number of stitches at the section CD can be set up to 500 stitches. If the stitch length is 2 mm, it is possible to sew approximately 1,000 mm (1 m). This function can perform the automatic one-shot stitching without using the material end sensor (ED : optional). Therefore, the sewing machine performs the sewing to the last according to the sewing pattern even if the label is not located at the end of material when the pedal is depressed once. – 6 – (4) IP-100E operation panel Refer to the instruction manual of IP-100E/SC-510 for further information. Re-sewing switch Unused Needle up/down This is the switch to perform needle up/down compensating stitching. compensating switch (Needle up/down compensating stitching and one stitch compensating stitching can be changed over with function setting No.22.) Screen changeover This is the switch to change over the screen. switch With/without reverse This is the switch to turn ON/OFF automatic reverse feed stitch at sewing start. feed stitch at sewing * This switch cannot be used with the sewing machine which is not start switch provided with automatic reverse feed stitching device. With/without reverse This is the switch to turn ON/OFF automatic reverse feed stitch at sewing end. feed stitch at sewing * This switch cannot be used with the sewing machine which is not end switch provided with automatic reverse feed stitching device. Reset switch This is the switch to make the value of bobbin thread counter or sewing counter the set value. Re-sewing switch Information switch Power display lamp Needle up/down compensating switch Material edge sensor switch Smart media cover Screen changeover switch One-shot stitching switch Smart media slot With/without reverse feed 

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,