Honeywell 51196653-200 变送器

产品标题：Honeywell 51196653-200 
产品型号：Honeywell 51196653-200 
品牌：Honeywell  
发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

产品图片展示

产品详情资料

​​​​​​​串行端口4、RS-232/RS-485端口、DB-9连接器网络端口2、10/100BaseT以太网端口、RJ-45连接器（4351A和4353型）2、光纤模式以太网端口、带有62.5/125 um光缆的MTRJ连接器（4352A和4354型）端口隔离500 VDC协议TriStation、Modbus、TCP/IP、ICMP、SNTP、TSAA、Trimble GPS、对等、对等时间同步，支持Jet Direct（网络打印）Modbus功能01-读取线圈状态06-修改寄存器内容02-读取输入状态07-读取异常状态03-读取保持寄存器08-环回诊断测试04-读取输入寄存器15-强制多线圈05-修改线圈状态16-预设多寄存器通信速度铜以太网端口：10/100 Mbps光纤以太网端口：100 Mbps串行端口：每个端口高达115.2 Kbps状态指示灯PASS、FAULT、ACTIVE、FIRM LINK-每个网络端口1个，TX（Transmit）-每个端口1个，RX（接收）-每个端口1个PASS FAULT ACTIVE FIRM NET 1 LINK TX RX NET 2 LINK TX-RX-SERIAL 1 TX-RX SERIAL 2 TX RX-DEBUG TX-SERIAL 3 SERIAL 4 TX RX435x TCM NET 1-铜缆（4351A，4353）或光纤（4352A，4354）NET 2-铜缆（43 51A，43 53）或光缆（43 52A，43 54）GPS串行端口#1或Modbus接口串行端口#2 Modbus口串行端口#3 Modbus界面串行端口#4Triconex的TriStation或Modbus接口调试端口使用27增强型智能通信模块4119A型增强型智能通讯模块（EICM）允许Tricon与Modbus主站和从站、TriStation和打印机通信。对于Modbus连接，EICM用户可以为一个主设备和一个从设备选择RS-232点拓扑接口，或为一个主机和多32个从设备选RS-485接口。RS-485网络中继线可以是一根或两根双绞线，长可达4000英尺（1200米）。每个EICM包含四个串行端口和一个并行端口，可以同时操作。每个串行端口可以配置为Modbus主机，每个Tricon机箱多有七个Modbus主设备。单个Tricon系统多支持两个EICM，它们必须位于一个逻辑插槽中。（热备盘功能不适用于EICM，但您可以在控制器联机时更换有故障的EICM。）每个串行端口都有的地址，并且支持Modbus或TriStation接口。Modbus通信可以在RTU或ASCII模式下执行。并行端口为打印机提供Centronics接口。每个EICM支持57.6千位/秒的聚合数据速率（对于所有四个串行端口）。Tricon的程序使用变量名作为标识符，但Modbus设备使用称为别名的数字地址。因此，必须为Modbus设备读取或写入的每个Tricon变量名分配别名。别名是一个五位数字，表示Modbus消息类型和Tricon中变量的地址。在TriStation中分配别名。只要将别名分配给Tricon变量，任何标准Modbus设备都可以通过EICM与Tricon通信。当主机通过其他通信模块（如NCM）访问Tricon时，也必须使用别名。有关更多信息，请参阅第59页的“通信能力”。EICM规格型号4119A，隔离串行端口4端口RS-232、RS-422或RS-485并行端口1，Centronics，隔离端口隔离500 VDC协议TriStation，支持Modbus Modbus功能01-读取线圈状态02-读取输入状态03-读取保持寄存器04-读取输入寄存器05-修改线圈状态06-修改寄存器内容07-读取异常状态08-环回诊断测试15-强制多线圈16-预设多寄存器通信速度1200、2400、9600，或19200波特率诊断指示灯PASS、FAULT、ACTIVE TX（Transmit）-每个端口1个RX（Receive）-每端口1个Serial ports 4, RS-232/RS-485 ports, DB-9 connectors Network ports 2, 10/100BaseT Ethernet ports, RJ-45 connectors (model 4351A and 4353) 2, fiber-optic mode Ethernet ports, MTRJ connectors with 62.5/125 um fiber cables (model 4352A and 4354) Port isolation 500 VDC Protocols TriStation, Modbus, TCP/IP, ICMP, SNTP, TSAA, Trimble GPS, Peer-to-Peer, Peer-to-Peer Time Synchronization, Jet Direct (network printing) Modbus functions supported 01 — Read Coil Status 06 — Modify Register Content 02 — Read Input Status 07 — Read Exception Status 03 — Read Holding Registers 08 — Loopback Diagnostic Test 04 — Read Input Registers 15 — Force Multiple Coils 05 — Modify Coil Status 16 — Preset Multiple Registers Communication speed Copper Ethernet ports: 10/100 Mbps Fiber Ethernet ports: 100 Mbps Serial ports: up to 115.2 Kbps per port Status Indicators PASS, FAULT, ACTIVE, FIRM LINK— 1 per network port, TX (Transmit) — 1 per port, RX (Receive) — 1 per port PASS FAULT ACTIVE FIRM NET 1 LINK TX RX NET 2 LINK TX RX SERIAL 1 TX RX SERIAL 2 TX RX DEBUG TX RX SERIAL 3 SERIAL 4 TX RX 435x TCM NET 1—Copper (4351A, 4353) or Fiber (4352A, 4354) NET 2—Copper (4351A, 4353) or Fiber (4352A, 4354) Serial Port #1 for GPS or Modbus interface Serial Port #2 for Modbus interface Serial Port #3 for Modbus interface Serial Port #4 for TriStation or Modbus interface Debug Port for Triconex use 27 Enhanced Intelligent Communication Module The model 4119A Enhanced Intelligent Communication Module (EICM) allows the Tricon to communicate with Modbus masters and slaves, TriStation and printers. For Modbus connections, the EICM user can select the RS-232 point-topoint interface for one master and one slave, or the RS-485 interface for one master and up to 32 slaves. The RS-485 network trunk can be one or two twisted-pair wires up to a maximum of 4,000 feet (1,200 meters). Each EICM contains four serial ports and one parallel port which can operate concurrently. Each serial port can be configured as a Modbus master with up to seven Modbus masters per Tricon chassis. A single Tricon system supports a maximum of two EICMs, which must reside in one logical slot. (The hot-spare feature is not available for the EICM, though you can replace a faulty EICM while the controller is online.) Each serial port is uniquely addressed and supports either the Modbus or TriStation interface. Modbus communication can be performed in either RTU or ASCII mode. The parallel port provides a Centronics interface to a printer. Each EICM supports an aggregate data rate of 57.6 kilobits per second (for all four serial ports). Programs for the Tricon use variable names as identifiers but Modbus devices use numeric addresses called aliases. Therefore an alias must be assigned to each Tricon variable name that will be read by or written to a Modbus device. An alias is a five-digit number which represents the Modbus message type and the address of the variable in the Tricon. An alias number is assigned in TriStation. Any standard Modbus device can communicate with the Tricon through the EICM, provided that aliases are assigned to the Tricon variables. Alias numbers must also be used when host computers access the Tricon through other communication modules, such as the NCM. See “Communication Capabilities” on page 59 for more information. EICM Specifications Model Number 4119A, Isolated Serial ports 4 ports RS-232, RS-422 or RS-485 Parallel ports 1, Centronics, isolated Port isolation 500 VDC Protocol TriStation, Modbus Modbus functions supported 01 — Read Coil Status 02 — Read Input Status 03 — Read Holding Registers 04 — Read Input Registers 05 — Modify Coil Status 06 — Modify Register Content 07 — Read Exception Status 08 — Loopback Diagnostic Test 15 — Force Multiple Coils 16 — Preset Multiple Registers Communication speed 1200, 2400, 9600, or 19,200 Baud Diagnostic Indicators PASS, FAULT, ACTIVE TX (Transmit) — 1 per port RX (Receive) — 1 per port

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,