YOKOGAWA AIP171 横河压力变送器

产品详情资料

 和MicroNet产品。然而，屏蔽也必须在网络中的一个点直接端接至机箱（接地）。对于伍德沃德设备，直接接地应位于主设备端，因为它离开主设备的外壳。始终使用屏蔽电缆改善工业环境中的通信。节点处的电线终端应尽可能少地暴露无屏蔽电缆（小于3.8 cm/1.5英寸）。RTCnet/LINKnet HT节点手册26640 8多个节点之间的Woodward菊花链CAN电缆允许在每个节点之间留有（20至30）cm/（8至12）英寸的屏蔽电缆，这违反了下面列出的屏蔽电缆接线盒屏蔽断裂的标准做法。（屏蔽中断不是屏蔽的停止。它是将包含内部导线的完整屏蔽减少为一根导线，以穿过或连接到接线板。）这仅适用于节点处的CAN，只要距离外壳主出口入口点近的接线板的电缆在另一个接线板完全屏蔽电缆电线之前至少有1m/39英寸长。and MicroNet products. However, the shield must also be directly terminated to chassis (Earth) at one point in the network. In the case of Woodward equipment, the direct ground is meant to be located at the master device end, as it exits the master device’s enclosure. Always use shielded cables for improved communications in industrial environments. Wire terminations at the node should expose as little un-shielded cable as possible (less than 3.8 cm / 1.5 inches). RTCnet / LINKnet HT Nodes Manual 26640 8 Woodward Daisy chaining CAN cables between multiple nodes allows leaving down to (20 to 30) cm / (8 to 12) inches of shielded cable between each node, a violation of the standard practice with shielded cable terminal block shield breaks listed below. (The shield break is not a stop of the shield. It is reducing the full shield encompassing internal wires to a single wire to pass through or connect to the terminal block.) This is acceptable for CAN only at the nodes, as long as the cable from the terminal block closest to the main exit entrance point of the enclosure is at least 1 m / 39 inches long before another terminal block break in the full shielding of the cable wires.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,