0100-38033 AMAT Applied Materials控制系统模块备件

产品详情资料

 听力受损风险！如果人员长时间出现在非隔音机器附近：•确保使用了护耳装置。•确保安装条件（参见安装条件[► 7] ）。•打开机器。•确保大允许起动次数不超过每小时12次。这些启动应在一小时内完成。•确保操作条件符合技术数据[► 23]. • 运行几分钟后，检查油位，必要时加满。一旦机器在正常运行条件下运行：•测量电机电流并记录，作为未来维护和故障排除工作的参考。6.1带回油阀的版本在操作过程中，油积聚在油分离器上腔室的底部，只要机器运行，油就不会向下流入下腔室。连续运行10小时后，如果吸入侧和压力侧在较短时间后出现高压差：•关闭机器至少15分钟。ð油可以从油分离器的上部腔室流到底部腔室7|维护14/28 0870209168_RA0025-0100F_-0001_IM_en 6.2输送可冷凝蒸汽气流中的水蒸汽在一定范围内是可容忍的。其他蒸汽的输送应与Busch达成一致。如果要输送可冷凝蒸汽：30分钟*不包括在交付范围内•Risk of damage to hearing! If persons are present in the vicinity of a non noise insulated machine over extended periods: • Make sure that ear protection is being used. • Make sure that the installation conditions (see Installation Conditions [► 7]) are met. • Switch on the machine. • Make sure that the maximum permissible number of starts does not exceed 12 starts per hour. Those starts should be spread within the hour. • Make sure that the operating conditions comply with the Technical Data [► 23]. • After a few minutes of operation, check the oil level and top up if necessary. As soon as the machine is operated under normal operating conditions: • Measure the motor current and record it as reference for future maintenance and troubleshooting work. 6.1 Version with Oil Return Valve During operation oil accumulates at the bottom of the upper chamber of the oil separator, which cannot flow down into the bottom chamber, as long as the machine runs. After 10 hours of continuous operation, in case of high pressure difference between suction side and pressure side after a shorter period: • Shut down the machine for at least 15 minutes. ð The oil can run down from the upper chamber of the oil separator into the bottom chamber 7 | Maintenance 14 / 28 0870209168_RA0025-0100F_-0001_IM_en 6.2 Conveying Condensable Vapours Water vapour within the gas flow is tolerated within certain limits. The conveyance of other vapours shall be agreed upon with Busch. If condensable vapours are to be conveyed: 30 minutes * not included in the scope of delivery •

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,