欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

ABB GTO1300V880A SAFT25F380变频器

型号: GTO1300V880A SAFT25F380  分类: foxboro
  • GTO1300V880A SAFT25F380
  • GTO1300V880A SAFT25F380
  • GTO1300V880A SAFT25F380
  • GTO1300V880A SAFT25F380
  • GTO1300V880A SAFT25F380


产品详情资料

 可能导致人身伤害。接线盒不要过度拧紧端子螺钉。所有端子的建议扭矩为6 in/lb(.678 N/M)。串行总线接线端子1至4用于串行总线。这些端子可接受一根AWG#12电线(平均横截面为3.3mm2)或两根AWG#14电线(平均截面为2.1mm2)。建议的小导线尺寸为AWG#22(横截面平均36mm2)。端子1-4还可容纳宽达0.27英寸(6.85毫米)的扁平或环形端子,6号螺钉的小开口,从螺钉中心到后挡板的深度达0.20英寸(5.1mm)。确保未屏蔽的电线末端不超过2英寸(5厘米)。使用《系统和通信用户手册》中推荐的电缆类型之一,将串行总线连接到端子1-4。1 2 3 4串行1串行2屏蔽输入屏蔽输出。如果块位于总线的任一端,则在其串行1和串行2端子之间连接适当类型的端接电阻器(详见《系统和通讯用户手册》)。Serial 1 Serial 2 Shield In Shield Out Start of Bus End of Bus Terminating Resistor Serial 1串行2屏蔽入屏蔽出总线端接电阻器Serial 1屏蔽入屏蔽输出端接电阻器电压/电流4输入/2输出模拟块2002年6月GFK-0048E 3现场接线端子5至32用于现场设备。personal injury may result. Block Wiring Do not overtorque the terminal screws. Recommended torque for all terminals is 6 in/lb (.678 N/M). Serial Bus Wiring Terminals 1 to 4 are for the serial bus. These terminals accept one AWG #12 wire (avg 3.3mm2 cross-section) or two AWG #14 wires (each avg 2.1mm2 in cross-section). The minimum recommended wire size is AWG #22 (avg .36mm2 in cross-section). Terminals 1 - 4 can also accommodate spade or ring terminals up to 0.27 inch (6.85mm) wide with a minimum opening for a #6 screw, and up to 0.20 inch (5.1mm) depth from the screw center to the back barrier. Be sure unshielded wire ends are not longer than 2 inches (5 cm). Using one of the cable types recommended in the System and Communications User’s Manual, connect the serial bus to terminals 1- 4. 1 2 3 4 SERIAL 1 SERIAL 2 SHIELD IN SHIELD OUT If the block is at either end of the bus, connect a terminating resistor of the appropriate type (see the System and Communications User’s Manual for details) across its Serial 1 and Serial 2 terminals. Serial 1 Serial 2 Shield In Shield Out Start of Bus End of Bus Terminating Resistor Serial 1 Serial 2 Shield In Shield Out Terminating Resistor Voltage/Current 4 Input/2 Output Analog Blocks June 2002 GFK-0048E 3 Field Wiring Terminals 5 to 32 are for field devices.

发货期:1-3个工作日,具体可联系客服
质保:质保期一年!

 

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能,还需了解产品的使用寿命环境。

●充分学习产品使用手册,否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,

 



更多
查看更多 >>

推荐产品