AMAT 0010-29210销售控制器备件

产品详情资料

 . .麦克风/线路通道上的输入变压器应为可选。每个通道应包括后面板装饰控制。前面板电平控制和+24V幻像电源开关。应在每个通道上选择-10dB、-20dB或-40dB的自动和/或手动静音。自动静音应由选定的优先通道触发，手动静音应由外部触点闭合触发。混音器的输出部分应包括主音量控制、带开/关开关的嵌入式音调控制、响度和低切滤波器开关、带后面板阈值控制的内置压缩器，以及带后面板音量控制的内部预告蜂音。后面板端子应允许远程控制主级。应提供两个单独的插入点，用于连接外部信号处理或远程控制装置。应为其他系统互连提供两个线路输出和一个堆叠输入。所有通道输入和放大器输出连接应在隔离带螺纹端子上。混音器/放大器应包括透明安全盖和可拆卸的机架翼/手柄。在额定功率下，直接负载的频率响应应为20Hz至20kHz的+0/1.5dB。额定功率下1kHz时，THD+噪声应小于0.2%。150W终端的麦克风输入等效输入噪声应为-123dBu。额定功率下线路输入时，从20Hz到20kHz的信噪比应大于78dB。功耗应小于90W（CMA 30）、220W（CMA60）或375W（CMA120）。尺寸应为3.68英寸（2个机架空间）高，Input transformers shall be optional on the mic/line channels. Each channel shall include a rear panel trim control. a front panel level control, and a +24V phantom power switch. Automatic and/or manual muting, by -10dB, -20dB, or -40dB, shall be selectable on each channel. Automatic muting shall be triggered by selected priority channels and manual muting shall be triggered by external contact closures. The output section of the mixer shall include a master level control, recessed tone controls with on/off switch, loudness & low-cut filter switches, a built-in compressor with a rear panel threshold control, and an internal preannouncement chime tone with rear panel level control. Rear panel terminals shall allow remote control of master level. Two separate insert points shall be provided for connection of external signal processing or remote contol devices. Two line outputs and one stacking input shall be provided for other system interconnections. All channel input and amplifier output connections shall be on barrier strip screw terminals. The mixer/amplifier shall include a see-through security cover and removable rack-wing/handles. Frequency Response shall be +0/-1.5dB from 20Hz to 20kHz at rated power into a direct load. THD + Noise shall be less than 0.2% at 1kHz at rated power. Equivalent Input Noise shall be -123dBu at mic input with 150W termination. Signal-to-Noise shall be greater than 78dB from 20Hz to 20kHz at line input at rated power. Power consumption shall be less than 90W (CMA 30), 220W (CMA 60), or 375W (CMA 120). Dimensions shall be 3.68" (2 rack spaces) high, 

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,