Applied Materials 0100-01877 PCB Card应用模块

产品详情资料

 公共端子组：A组（内部连接在一起）和B组（内部相连在一起）通常用于电源连接。E组有五个公共端子，内部连接在一起并与电源和点端子隔离。它们可以根据需要用于应用布线。端子1–16用于I/O接线NC NC NC每个端子多可容纳一根AWG#14（2.1 mm2）或两条AWG#18（0.86 mm2）至AWG#22（.35 mm2）导线。使用额定温度为90°C的铜线。建议终端扭矩为4.5英寸/磅。通过任何一个端子的大电流为10安培。I/O端子块IC670CHS102允许热插拔模块，而不会影响总线接口单元或I/O站中的其他模块。热插拔只能在非危险位置进行。兼容性I/O端子块IC670CHS102在每个模块位置都有一个突出的对准槽。它必须与目录号后缀为J或以上的模块一起使用。这些模块有一个突出的凸耳，可装入对齐槽中。总线接口单元版本2.1或更高版本需要用于热插入/移除I/O站中的模块。不建议在同一I/O站中混合IC670CHS10x端子块和IC670HS00x端子块。注意：I/O端子块IC670CHS102和IC670HS002B或更高版本下面有金属接地条。groups of common terminals: the A group (internally connected together) and B group (internally connected together) are typically used for power connections. The E group has five common terminals that are internally tied together and isolated from the power and point terminals. They can be used as needed for application wiring. Terminals 1 – 16 are used for I/O wiring NC NC NC Each terminal accommodates up to one AWG #14 (2.1 mm2) or two AWG #18 (0.86mm2) through AWG #22 (.35 mm2) wires. Use copper wire rated for 90 degrees C. Recommended terminal torque is 4.5 in/lbs. The maximum current through any one terminal is 10 Amps. I/O Terminal Block IC670CHS102 permits hot insertion/ removal of modules without affecting the Bus Interface Unit or other modules in the I/O Station. Hot insertion/removal can only be performed in non-hazardous locations. Compatibility I/O Terminal Block IC670CHS102 has a projecting alignment slot at each module position. It must be used with modules whose catalog number suffix is J or above. These modules have a projecting tab that fits into the alignment slot. Bus Interface Unit version 2.1 or later is required for hot insertion/removal of modules in the I/O Station. Mixing IC670CHS10x terminal blocks with IC670CHS00x terminal blocks in the same I/O station is not recommended. Caution I/O Terminal Blocks IC670CHS102 and IC670CHS002B or later have a metal grounding strip underneath.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,