Applied Materials 0100-09040 Board应用模块

产品详情资料

 长度不超过4英寸（10.16厘米）。I/O端子块IC670CHS101允许热插拔模块，而不会影响总线接口单元或I/O站中的其他模块。热插拔只能在非危险位置进行。兼容性I/O端子块IC670CHS101在每个模块位置都有一个突出的对准槽。它必须与目录号后缀为J或以上的模块一起使用。这些模块有一个突出的凸耳，可装入对齐槽中。总线接口单元版本2.1或更高版本需要用于热插入/移除I/O站中的模块。不建议在同一I/O站中混合IC670CHS10x端子块和IC670HS00x端子块。注意I/O端子块IC670CHS101和IC670HS001B或更高版本具有金属接地条。它们必须与接地导电DIN导轨一起使用。不要将此接线板与A型I/O接线板或BIU接线板IC670GBI001一起使用，因为它们没有金属接地带；所得到的系统将具有较差的抗噪声性。在DIN导轨上安装接线板新的I/O接线板由一对坚固的标签保护。安装接线盒时，将这些标签保持在适当位置，以防止接线盒组件受到环境污染。按照以下步骤在DIN导轨上安装接线板。1.倾斜I/O端子块并将其放置在导轨上，抓住凸耳后面的导轨not more than 4 inches (10.16 cm) long. I/O Terminal Block IC670CHS101 permits hot insertion/ removal of modules without affecting the Bus Interface Unit or other modules in the I/O Station. Hot insertion/removal can only be performed in non-hazardous locations. Compatibility I/O Terminal Block IC670CHS101 has a projecting alignment slot at each module position. It must be used with modules whose catalog number suffix is J or above. These modules have a projecting tab that fits into the alignment slot. Bus Interface Unit version 2.1 or later is required for hot insertion/removal of modules in the I/O Station. Mixing IC670CHS10x terminal blocks with IC670CHS00x terminal blocks in the same I/O station is not recommended. Caution I/O Terminal Blocks IC670CHS101 and IC670CHS001B or later later have a metal grounding strip. They must be used with a grounded conductive DIN rail. Do not use this terminal block with A version I/O Terminal Blocks or BIU Terminal Block IC670GBI001, which do not have a metal grounding strip; the resulting system would have poor noise immunity. Installing a Terminal Block on a DIN Rail A new I/O Terminal Block is protected by a pair of sturdy labels. Keep these labels in place while installing the terminal block to prevent environmental contamination of block components. Follow the steps below to install the terminal block on a DIN rail. 1. Tilt the I/O Terminal Block and position it over the rail, catching the rail behind the tabs 

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,