Applied Materials 0100-09145 Board应用模块

型号： 0100-09145　分类： foxboro

0100-09145

产品详情资料

抓住接线板中的凸耳后面的导轨。2.向下转动接线盒，直到弹簧锁闩卡入到位。卡舌DIN导轨46413 3.拧紧DIN导轨夹紧螺钉。建议扭矩为4英寸/磅至6英寸/磅。46484拧紧从DIN导轨上卸下I/O端子块如果有辅助端子块，则必须在将I/O端子块从DIN导轨拆下之前将其取下。然后按照以下步骤卸下I/O端子板。1.松开DIN导轨夹螺钉。2.将一把小平刃螺丝刀插入上部锁闩并向外撬。3.轻轻向上拉动接线盒顶部，将上部插销与导轨分离。将螺丝刀插入下锁销并向外撬，以松开接线盒。2.撬起上部闩锁46485 3.撬起下部闩锁1.松开2个带有接线盒端子GFK-0862G连接底座的I/O接线板在其接线板上安装模块之前，安装连接电缆。下图所示的电缆与I/O端子板一起提供。一组三根连接电缆可作为更新部件号IC670CBL001提供。可选的21英寸（0.53米）电缆也可提供（每个I/O站只能使用一根更长的电缆）。接线盒连接电缆拆除以接近底座间电缆连接器46497。连接器用键固定，以确保正确安装。安装电缆后，确保它牢固地固定在两个接头上。catching the rail behind the tabs in the terminal block. 2. Pivot the terminal block downward until the spring-loaded latches click into place. tabs DIN rail 46413 3. Tighten the DIN rail clamp screw. Recommended torque is 4 in/lbs to 6 in/lbs. 46484 Tighten Removing the I/O Terminal Block from a DIN Rail If Auxiliary Terminal Blocks are present, they must be taken off before the I/O Terminal Block can be removed from the DIN rail. Then follow the steps below to remove the I/O Terminal Block. 1. Loosen the DIN rail clamp screw. 2. Insert a small flat-blade screwdriver into the upper latch and pry it outward. 3. Pull up gently on the top of the terminal block to disengage the upper latch from the rail. Insert the screwdriver into the lower latch and pry it outward to free the terminal block. 2. Pry Upper latch 46485 3. Pry Lower latch 1. Loosen 2 I/O Terminal Block with Box Terminals GFK-0862G Connecting Bases Before installing modules on their terminal blocks, install the connecting cable(s). The cable illustrated below is supplied with the I/O Terminal Block. A set of three connecting cables is available as renewal part number IC670CBL001. Optional 21 inch (0.53 meter) cable is also available (only one longer cable can be used per I/O station). Terminal Block Connection Cable Remove to access interbase cable connector 46497 The connectors are keyed to assure proper installation. After installing the cable, be sure it is firmly seated on both connectors.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业