Applied Materials 0130-00537工业模块备件

产品详情资料

版本6.02固件中的配置字已得到增强，以包括对反重置饱和操作的支持（如上所述）。但是，如果错误超出死区限制，则错误将减少死区限制（错误=错误-死区限制）。bit 4=反复位卷绕动作。当该位设置为零时，反复位卷绕动作使用复位回计算。当被箝位时，这将用产生箝位所需的任何值替换累积的Y项。当位设置为1时，这将在计算开始时用Y项的值重新放置累积的Y项。这样，只要夹紧，预夹紧Y值就保持不变。注：防复位饱和动作位仅在6.01或更高版本的CPU上可用。15 GFK-1197D 1997年2月13日重要产品信息：PLC CPU模块，版本6.02 IC697指令计时表A-1包含几个IC697 CPU指令计时的更新信息。这些更新适用于附录A中可编程控制器参考手册中给出的数字。表A-1。指令定时启用禁用增量功能组功能时间（以微秒为单位）基于IC641编程软件的6.0版（“–”表示值不可用、不适用或6.0版不支持），增量以指定的长度为单位。对于位操作功能，微秒/位。对于数据移动函数，微秒/位或字数。3.启用时间用于%R类型的单长度单位。I/O中断速率限制表A-13和A-14（下文）包含IC697 CPU中断速率限制的更新信息。The configuration word has been enhanced in version 6.02 firmware to include support for an anti-reset windup action (as described above) If, however, the error is out side the deadband limits, then the error is reduced by the deadband limit (error = error - deadband limit). bit 4 = Anti-reset windup action. When this bit is set to zero, the anti-reset windup action uses a reset back calculation. When the is clamped, this replaces the accumulated Y term with whatever value is necessary to produce the clamped exactly. When the bit is set to one, this re places the accumulated Y term with the value of the Y term at the start of the calculation. In this way, the pre-clamp Y value is held as long as the is clamped. NOTE: The anti-reset windup action bit is only available on release 6.01 or later CPUs. 15 GFK-1197D February 13, 1997 Important Product Information: PLC CPU Module, Release 6.02 IC697 Instruction Timing Table A-1 below contains updated information for several of the IC697 CPU instruction timings. These updates apply to those numbers given in the Programmable Controller Reference Manual, in appendix A. Table A-1. Instruction Timing Enabled Disabled Increment Function Group Function  Time (in microseconds) is based on Release 6.0 of IC641 programming software software ( “–” indicates value not available, not applicable, or not supported with Release 6.0) 2. For table functions, increment is in units of length specified. For bit operation functions, microseconds/bit. For data move functions, microseconds/the number of bits or words. 3. Enabled time is for single length units of type %R. I/O Interrupt Rate Limits Table A-13 and A-14 (below) contain updated information for the IC697 CPU interrupt rate limits.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,