Applied Materials 16889-01 CPU自动化工控备件

产品详情资料

  .关闭机柜电源。2.从终端装置的E1、E2和E3 Faston连接器上断开电源和接地线。拆下导线时，根据其端子分配标记导线。3.如果终端单元连接到I/O模块，请将I/O模块从模块安装单元背板上的电缆连接中拔出。4.如果连接了终端电缆，请将其从终端装置上的P1连接器上断开。5.关闭现场设备的电源。从接线板上断开I/O接线。根据导线的端子分配标记导线。6.从终端装置上拆除所有电缆和电线后，拆除两个安装螺钉，并从现场终端面板上拆除终端装置。7.验证更换终端装置的保险丝座F1和F2中是否安装了正确的保险丝。8.验证更换终端装置上的双列直插式测试设置和跳线设置是否与故障终端装置上双列直射式测试设置及跳线设置相同。注：NTDI01和NTDI02可能不可互换。设置可能不同。9.用两个安装螺钉将替换终端装置电路板固定到现场终端面板。小心：在安装或拆卸模块之前，从其指定的插槽中取出模块. Turn off power to the cabinet. 2. Disconnect the power source and ground wiring from the E1, E2, and E3 Faston connectors of the termination unit. Mark the wires according to their terminal assignment as they are removed. 3. If the termination unit is connected to an I/O module, pull the I/O module out of its cable connection on the module mounting unit backplane. 4. If there is a termination cable connected, disconnect it from the P1 connector on the termination unit. 5. Turn off power to the field devices. Disconnect I/O wiring from the terminal blocks. Mark the wires according to their terminal assignment. 6. When all cables and wires are removed from the termination unit, remove the two mounting screws and remove the termination unit from the field termination panel. 7. Verify the proper fuses are installed in fuse holders F1 and F2 of the replacement termination unit. 8. Verify that the dipshunt settings and jumper settings on the replacement termination unit are the same as the dipshunt settings and jumper settings on the faulty termination unit. NOTE: NTDI01 and NTDI02 may not be interchangeable. The settings may not be the same. 9. Secure the replacement termination unit circuit board to the field termination panel with the two mounting screws. CAUTION Remove a module from its assigned slot before installing or removing

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,