欢迎访问瑞昌明盛自动化设备有限公司官网!
关于我们 | 联系我们

+86 15270269218

您的位置:首页>>产品中心 >> foxboro

Honeywell 900P01-0001低价处理出售模块控制器

型号: 900P01-0001  分类: foxboro
  • 900P01-0001
  • 900P01-0001
  • 900P01-0001
  • 900P01-0001
  • 900P01-0001


产品详情资料

 .2待定净额。Int.1 53 PMC-5565PIORC反射存储板设置为高(1),当读取此寄存器(LISR)时,全局中断启用位将自动清除。该位可通过该寄存器进行读写访问,因此允许单个读修改写操作来服务本地中断。位13:本地存储器奇偶校验错误—当该位为高(1)时,在本地存储器访问中检测到一个或多个奇偶校验误差。该位被锁存。一旦设置,必须通过将零写入该位位置来清除。注意,在奇偶校验有效之前,LCSR1的位27必须设置为高。还要注意,奇偶校验仅适用于32位和64位访问。禁止字(16位)和字节(8位)存储器写入访问。12位:禁止内存写入—当该位为高(1)时,当电路板处于奇偶校验启用模式时,尝试并禁止8位字节、16位字或24位写入本地内存。该位被锁存。一旦设置,必须通过将零写入该位位置来清除。11位:锁存同步丢失–当该位为高(1)时,接收器电路与输入信号失去同步一次或多次。该位被锁存。一旦设置,必须通过将零写入该位位置来清除。锁存同步丢失的断言通常指示接收机链路断开或断开,. 2 Pending Net. Int. 1 53 PMC-5565PIORC Reflective Memory Board set high (1), the Global Interrupt Enable bit will automatically be cleared as this register (LISR) is being read. This bit is read and write accessible with this register and thus allows a single read‐modify‐write operation to service the local interrupts. Bit 13: Local Memory Parity Error ‐ When this bit is high (1), one or more parity errors have been detected on local memory accesses. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. Note that Bit 27 of the LCSR1 must be set high before parity is active. Also note that parity works only on 32‐bit and 64‐bit accesses. Word (16‐bit) and byte (8‐bit) memory write accesses are inhibited. Bit 12: Memory Write Inhibited ‐ When this bit is high (1), an 8‐bit byte, a 16‐bit word, or a 24‐bit write to local memory was attempted and inhibited while the board was in the parity enabled mode. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. Bit 11: Latched Sync Loss – When this bit is high (1), the receiver circuit has lost synchronization with the incoming signal one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. The assertion of the Latched Sync Loss usually indicates the receiver link was or is disconnected, 

发货期:1-3个工作日,具体可联系客服
质保:质保期一年!

 

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能,还需了解产品的使用寿命环境。

●充分学习产品使用手册,否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,

 



更多
查看更多 >>

推荐产品