REXRTOH SYHNC100-NIB-24-P-D-E23-A012 R900978416库存模块

产品详情资料

这些工具通常不是库存物品，从分发到交付周期很长。如果您对此问题有任何进一步的问题，请随时联系GE Fanuc PLC技术支持热线1-800-GE Fanuc（1-800-433-2682）或国际直拨804-978-6036。带有颜色代码的引脚连接如下表所示。电缆由12对双绞线组成；导线尺寸为#24 AWG（0.22mm2）。输入/输出电缆数据表C GFK-0898F附录C–输入/输出数据表C-29表B-7。24针连接器的导线列表针脚编号对#导线颜色代码针脚编号对#导线颜色代码A1 1棕色B1 7紫色A2 1棕色/黑色B2 7紫色/黑色A3 2红色B3 8白色A4 2红色/黑色B4 8白色/黑色A5 3橙色B5 9灰色A6 3橙色/黑色B6 9灰色/黑色A7 4黄色B7 10粉色A8 4黄色/黑色B8 10粉色/黑色A9 5深绿色B9 11浅蓝色A10 5深蓝色/黑色B10 11浅蓝色/黑色A11 6深蓝色B11 12浅绿色A12 6深绿色/黑色B12 12浅绿色/黑色a45144注：每对电线都有一根纯色电线和一根带有黑色示踪物的同色电线。例如，对1有一根实心棕色导线与一根带有黑色示踪物的棕色导线配对。连接器3 2 1 12 12 3 2 1 B A行C列C-30系列90-30 PLC I/O模块规格–2000年7月GFK-0898F定制电缆的连接器深度由于定制电缆使用直连接器，因此在PLC前面需要的空间比工厂制造的电缆（具有直角连接器）所需的空间大。下图显示了当该电缆连接到模块时，PLC前面所需的空间。安装PLC的机柜的深度应考虑到此连接器增加的深度。2.187“1.5–2.5”典型PLC（侧视图）图B-19。用于定制电缆的PLC前连接器深度尺寸这些电缆的可能用途（工厂或定制）从32点模块上的24针连接器连接到用户提供的端子板/块或直接连接到I/O现场设备（开关、灯等）。从具有TBQC I/O面板适配器的16点模块上24针连接器到用户提供的接线板/接线盒或直接连接到I/O现场设备（开关、灯等）。为此，请使用右侧电缆IC693CBL328。有关TBQC（端子块快速连接）选项的信息，请参见附录J。从32点模块上的24针连接器通过导管连接到端子块快速接头端子块。这可以通过在拉动电缆穿过导管之后将可选的24针连接器之一连接到剥离端来实现。有关连接器选项的信息，请参阅“构建自定义长度电缆”一节。有关TBQC（接线板快速连接）选项的信息，请参见附录J。从16点模块上的连接器通过导管连接到TBQC接线板，该模块具有TBQC I/O面板适配器。这可以通过在拉动电缆穿过导管之后将可选的24针连接器之一连接到剥离端来实现。为此，使用右侧电缆IC693CBL328。
These tools are generally not stock items and can have significant lead times from distribution. If you have any further questions about this issue, please feel free to contact the GE Fanuc PLC Technical Support Hotline at 1-800-GE FANUC (1-800-433-2682), or International dial direct 804-978-6036. Pin connections with color codes are shown in the following table. Cables are made of 12 twisted pairs; wire size is #24 AWG (0.22mm2). I/O Cable Data Sheets C GFK-0898F Appendix C – I/O Cable Data Sheets C-29 Table B-7. Wire List for 24-Pin Connectors Pin Number Pair # Wire Color Code Pin Number Pair # Wire Color Code A1 1 BROWN B1 7 VIOLET A2 1 BROWN/BLACK B2 7 VIOLET/BLACK A3 2 RED B3 8 WHITE A4 2 RED/BLACK B4 8 WHITE/BLACK A5 3 ORANGE B5 9 GRAY A6 3 ORANGE/BLACK B6 9 GRAY/BLACK A7 4 YELLOW B7 10 PINK A8 4 YELLOW/BLACK B8 10 PINK/BLACK A9 5 DARK GREEN B9 11 LIGHT BLUE A10 5 DARK GREEN/BLACK B10 11 LIGHT BLUE/BLACK A11 6 DARK BLUE B11 12 LIGHT GREEN A12 6 DARK BLUE/BLACK B12 12 LIGHT GREEN/BLACK a45144 NOTE Each wire pair has a solid color wire and that same color wire with a black tracer. For example, Pair 1 has a solid brown wire paired with a brown wire with a black tracer. CONNECTOR 3 2 1 12 12 3 2 1 B Row A Row C C-30 Series 90-30 PLC I/O Module Specifications – July 2000 GFK-0898F Connector Depth for Custom Built Cables Because custom built cables use a straight connector, they require more space in front of the PLC than is required for a factory built cable, which has a right-angle connector. The following figure shows the space required in front of the PLC when this cable is connected to a module. The depth of the cabinet that the PLC is mounted in should allow for the depth added by this connector.2.187” 1.5–2.5” Typical PLC (Side View) Figure B-19. Dimensions for Depth of Connector in front of PLC for Custom Built Cables Possible Uses for These Cables (Factory or Custom Built)Connecting from the 24-pin connectors on a 32-point module to either a user-supplied terminal strip/block or directly to I/O field devices (switches, lights, etc.).Connecting from the 24-pin connector on a 16-point module that has a TBQC I/O faceplate adapter to either a user-supplied terminal strip/block or directly to I/O field devices (switches, lights, etc.). Use the right side cable, IC693CBL328, for this purpose. See Appendix J for information about TBQC (Terminal Block Quick Connect) options.Connecting from the 24-pin connectors on a 32-point module through a conduit to a Terminal Block Quick Connect terminal block. This can be accomplished by attaching one of the optional 24-pin connectors to the stripped end after pulling the cable through the conduit. See the section “Building Custom Length Cables” for information on the connector options. See Appendix J for information about TBQC (Terminal Block Quick Connect) options.Connecting from the connector on a 16-point module that has a TBQC I/O faceplate adapter through a conduit to a TBQC terminal block. This can be accomplished by attaching one of the optional 24-pin connectors to the stripped end after pulling the cable through the conduit. Use the right side cable, IC693CBL328, for this purpose.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,