TVB6003-1EIMC 1381-648241-12库存模块

产品详情资料

 如下：PWR顶部标记为PWR的绿色LED指示电源的工作状态。当电源具有正确的电源并且工作正常时，LED点亮；当电源故障或未通电时，LED熄灭。OK（正常）如果PLC运行正常，则第二个绿色LED（标记为OK）稳定点亮，如果PLC检测到问题，则熄灭。运行当PLC处于运行模式时，第三个绿色LED（标记为运行）稳定点亮。BATT如果内存备用电池电压过低，无法在断电状态下维持内存，底部红色LED（标记为BATT）将亮起；否则它将保持关闭状态。如果此指示灯亮起，则必须在从机架上卸下电源之前更换锂电池，否则可能会丢失PLC内存。输入过电压保护装置此信息适用于具有六个端子板的所有90-30系列电源。该电源的过电压保护装置内部连接到用户接线板上的引脚4。该针脚通常通过出厂时安装的跨接导线与机架接地（针脚3）相连。is as follows: PWR The top green LED, labeled PWR, provides an indication of the operating state of the power supply. The LED is ON when the power supply has a correct source of power and is operating properly, and OFF when a power supply fault occurs or power is not applied. OK The second green LED, labeled OK, is steady ON if the PLC is operating properly, and OFF if a problem is detected by the PLC. RUN The third green LED, labeled RUN, is steady ON when the PLC is in the RUN mode. BATT The bottom red LED, labeled BATT, will be ON if the memory backup battery voltage is too low to maintain the memory under a loss of power condition; otherwise it remains OFF. If this LED is ON, the Lithium battery must be replaced before removing power from the rack, or PLC memory may be lost. Input Overvoltage Protection Devices This information applies to all Series 90-30 power supplies that have six–terminal boards. The overvoltage protection devices for this power supply are connected internally to pin 4 on the user terminal strip. This pin is normally connected to frame ground (pin 3) with the supplied jumper strap which is installed at the factory.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,