GRBTU 3BSE013175R1框架接口模块 PLC卡件 控制系统ABB

产品详情资料

309059/A收发器单元5.3发射器机架发射器机架是收发器单元的下部子机架。它装有几个电路板和电源。可以从机架的前部或后部访问所有单元。发射机机架包含一个84 HP背板，允许从两侧插入电路板和模块。前部安装的模块均为6U深（220 mm），后部模块的标准深度为80 mm。所有电路板均由导轨支撑。机架还包含一个高效风扇单元。图19发射机机架–前视图发射机机架容纳以下前安装电路板和模块（从左起）：•电源PSU 12V•TX 36发射机板309059/A 49 Kongsberg EM 122图20发射机机架–后视图以下电路板和组件安装在后（从左）：•TX RIO后接口板•TX Power RIO后界面模块上图显示了0.5或1度Tx系统的典型电路板配置。每个EM 122型号的收发器单元中使用的板的数量不同。309059/A Transceiver Unit 5.3 Transmitter rack The Transmitter rack is the lower sub-rack of the Transceiver Unit. It holds several circuit boards and power supplies. All the units are accessed either from the front or the rear of the rack. The Transmitter rack contains an 84 HP backplane allowing circuit boards and modules to be inserted from both sides. The front mounted modules are all 6U deep (220 mm) and the rear modules have a standard depth of 80 mm. All circuit boards are supported by guide rails. The rack also contains a high efficiency fan unit. Figure 19 Transmitter rack – front view The Transmitter rack holds the following front mounted circuit boards and modules (from left): • Power Supply PSU 12V • TX 36 Transmitter Boards 309059/A 49 Kongsberg EM 122 Figure 20 Transmitter rack – rear view The following circuit boards and modules are rear mounted (from left) : • TX RIO Rear Interface Board • TX Power RIO Rear Interface Module The illustrations above display the typical circuit board configuration for a 0.5 or 1 degree Tx system. The number of boards used in the Transceiver Unit is different for each EM 122 model.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,