P3ECa HENF315309R2伺服驱动使用书工控卡件PLC/DCS备件模块

初始显示R0:03 AO 1.00>S I16:I0017–I0032要显示模块的默认STOP模式，请按→ →. 显示屏将显示模块的当前模式。默认模式为HOLD（保持）。R0:03 AO 1.00>S HLS/DEF:HOLD您可以通过按±键在HOLD（保持）和DEFLOW（除霜）模式之间切换。所选范围是当前显示的范围。R0:03 AO 1.00>S HLS/DEF：DEF LOW当屏幕上显示模块所需的模式时，按下ENT键即可接受。要返回上一屏幕，请按← 钥匙11 11-28 Series 90-30 PLC I/O Module Specifications–July 2000 GFK-0898F Selecting Output Channel Ranges（11 11-28系列90-30 PLC输入/输出模块规格–2000年7月GFK-08982F选择输出通道范围）8个通道中的每个通道的范围都可以显示、选择或更改，如下所述。有两个电流和两个电压范围可供选择。初始显示R0:03 AO 1.00>S I16:I0017–I0032要显示通道范围，请按→→→. 显示屏将显示频道1（或当前选定的频道）和个可用范围。R0:03 AO 1.00>S CHAN 1:0–10 V您可以切换范围Initial Display R0:03 AO 1.00 >S I16:I0017–I0032 To display the module‘s default STOP mode, press → →. The display will show the current mode of the module. The default mode is HOLD. R0:03 AO 1.00 >S HLS/DEF:HOLD You can toggle between the HOLD and DEFLOW modes by pressing the ± key. The range selected is the one currently displayed. R0:03 AO 1.00 >S HLS/DEF:DEF LOW When the desired mode for the module is displayed on the screen it can be accepted by pressing the ENT key. To return to the previous screen, press the ← key. 11 11-28 Series 90-30 PLC I/O Module Specifications – July 2000 GFK-0898F Selecting Output Channel Ranges The range for each of the 8 channels can be displayed and selected or changed as described below. There are two current and two voltage ranges that can be selected. Initial Display R0:03 AO 1.00 >S I16:I0017–I0032 To display the channel ranges press →→→. The display will show Channel 1 (or the currently selected channel) and the first available range. R0:03 AO 1.00 >S CHAN 1: 0 – 10 V You can toggle through the rang