O3EId HENF452777R3工业模块ABB

模拟电流/电压组合输入/输出模块提供多达4个差分输入电流或电压通道和2个单端输出通道，其中包括电流回路输出或电压输出。每个通道都可以根据应用所需的电流或电压范围进行单独配置。除选择当前输入模式所需的跳线外，所有模块配置均通过软件完成。可使用Logicmaster 90-30/20/Micro编程软件配置器功能或Series 90-30手持式编程器配置所有量程。注意，在本模块的描述中，该模块将简称为模拟组合模块。每个模拟输入能够提供五个输入范围（两个电压和三个电流），即：0至+10伏（单极）-输入和输出通道的默认范围10至+10伏（双极）0至20 mA 4至20 mA增强型默认输入范围为电压模式0至+10伏特（单极），用户数据The Analog Current/Voltage Combination Input/Output module provides up to 4 differential input current or voltage channels and 2 single-ended output channels with either current loop outputs or voltage outputs. Each channel can be individually configured for the current or voltage range, as applicable, required for your application. All module configuration is done through software, except for a jumper required for selecting the current input mode. All ranges can be configured using either the Logicmaster 90-30/20/Micro programming software configurator function or the Series 90-30 Hand-Held Programmer. Note that in this module’s description, the module will be simply referred to as the Analog Combo Module. Each analog input is capable of providing five input ranges (two voltage and three current), which are: 0 to +10 volts (unipolar) - default range for both input and output channels. –10 to +10 volts (bipolar) 0 to 20 mA 4 to 20 mA 4 to 20 mA Enhanced The default input range is voltage mode 0 to +10 volts (unipolar) with user data