GE通用电气IS200EPSMG2AEC DCS工控备件 现货

产品详情资料

接地（System 57电源满足此要求）。必须通过在消防卡上设置适当的链路来启用接地漏电检测电路。默认情况下，接地漏电故障条件配置为在板卡通用故障继电器上输出。4.5.6电源监视器持续监控24V电源的电压过高和过低情况。当检测到电源故障时，将生成板卡故障条件。如果电源过低，则火灾区域也会显示故障。4.5.7消防计数器每个防火区的消防计数器由消防卡保存在半久存储器中。对于相应区域上的每个报警条件，计数递增1。还将记录上次报警的时间和日期。单人步行测试不会影响计数值或时间戳。消防计数器只能通过工程卡打印设备使用。只能使用工程接口软件重置计数器。4.5.8多卡报警设施完全支持System 57多卡报警原理，允许在消防卡上定义主报警、分组报警或表决报警功能。的结果from ground (the System 57 power supplies meet this requirement). The earth leakage detection circuit must be enabled by setting the appropriate link on the fire card. By default the earth leakage fault condition is configured to be output on the card general fault relay. 4.5.6 Supply Monitor The 24V supply is continuously monitored for over and under range voltage conditions. When a supply fault is detected a card fault condition is generated. If the supply falls too low then the fire zones will also indicate fault. 4.5.7 Fire Counters Afire counter for each fire zone is retained in semipermanent memory by the fire card. The count is incremented by one for every alarm condition on the respective zone. The time and date of the last alarm is also recorded. One man walk test does not affect the count value or time stamp. The fire counters are only available via the Engineering Card printout facility. The counter can only be reset using the Engineering Interface Software. 4.5.8 Multi-Card Alarm Facilities The System 57 multi-card alarm philosophy is fully supported allowing a master, grouped or voted alarm function to be defined on the fire card. The results of

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,